Stone carving machine three major components and purchase

    There are several important parts to be aware of when purchasing stone engraving machines. If these important parts are purchased well, then the engraving machine will be very easy to use and will not be prone to failure. So, what are the main components to pay attention to when purchasing?

    First of all, it is a knife. If a worker wants to do something good, he must first sharpen his weapon. The carving knife is the sharp blade in the engraving machine. Only it can engrave the stone. Therefore, the knives are the first point to observe when purchasing. The knives need to have the following functions, to be hard, to be able to engrave hard stone. The motor of the knife should be stable, the speed should be relatively high, and the speed can be adjusted.

    Second, it is the engine. Because the engine of the engraving machine has different functions due to the engraving machine, the stone engraving machine manufacturer has a high-power engine at the time of design, and also has a slightly smaller power engine, and needs to select the power according to the needs. High power is more suitable for cutting and large engraving, while low power is more suitable for some precision engraving.

    Finally, it is the machine tool. The machine tool of the engraving machine should be stable and have better shock resistance. At the same time, the axis of the machine tool should be relatively wide, it is not easy to get stuck, and the operation should be smoother, so that it can maintain a relatively synchronous operation during the work, and there is no problem that the machine axis is stuck and cannot run.

Woodworking engraving machine knowledge introduction

    In the woodworking industry, many people are not too familiar with woodworking engraving machines, but if there is a lot of expertise in engraving machines, not many people know. The engraving machine belongs to a kind of professional processing machine, and the current market development prospects are still very good.
    Below, we will talk to friends about the woodworking engraving machine.
    First, the types of engraving machines are not single, but varied. The types of engraving machines that are common on the market today are distinguished from the shape of the track, and are mainly divided into square rail engraving machines and compass engraving machines. The operator can select the type of engraving machine according to the needs of processing crafts;
    Second, the driving mode of the engraving machine is two kinds of screw machine and rack machine. The biggest difference between the two machines is that the screw engraving machine is cheaper and has a wider range of uses. However, for crafts that require higher processing precision, it is best to use a rack engraving machine;
    Third, the engraving machine equipment is large and small, consumers should choose the right machine according to the size of the processed products. Woodworking works as large as a few meters, woodwork works as small as a few centimeters, can find the right machine for processing.
    Today's woodworking art, processing range is more and more, which requires more diverse processing machines. As long as consumers find a manufacturer of woodworking engraving machines with superior technology and excellent quality, they will be able to purchase the engraving machine that they are satisfied with.