IKO bearing maintenance

  1. Maintenance, inspection, and abnormal handling of IKO bearings In order to maintain the original performance of IKO bearings in good condition for as long as possible, maintenance, inspection, and accident prevention are required to ensure the reliability of operation and improve productivity. Economic. Maintenance is best carried out on a regular basis in accordance with the operating standards for the mechanical operating conditions. The contents include monitoring of operating conditions, replenishment or replacement of lubricants, and inspections for periodic disassembly.
As a maintenance item during operation, there are rotary sounds, vibration, temperature, and state of lubricant of IKO bearings.
2, IKO bearing damage and countermeasures Generally, if the IKO bearing is used correctly, it can be used until the fatigue life is reached. However, there will be accidents that are prematurely damaged and cannot be used. This early damage, as opposed to fatigue life, limits the quality of what is known as a fault or accident. Many of them are caused by inadvertent installation, use, and lubrication, and foreign objects intruding from the outside are insufficiently studied for the thermal effects of the shaft and the outer casing.
Regarding the damage state of the IKO bearing, for example, the jam of the ferrule rim of the roller IKO bearing can be considered as a cause of insufficient lubricant, unsuitability, defects in the oil supply structure, foreign matter intrusion, IKO bearing installation error, shaft If the deflection is too large, there will be coincidences of these reasons.
Therefore, it is difficult to know the true cause of the damage by investigating only IKO bearing damage. However, if you know the IKO bearing's use of machinery, the conditions of use, the structure around the IKO bearing, and understand the situation before and after the accident, combined with the damage state of IKO bearings and several reasons, it can prevent similar accidents from happening again.

For more information and purchase please visit: https://www.supplyforever.com

Choosing IKO bearing grease

    The choice of IKO bearing grease is directly related to the stable operation of the equipment. In order to better play the best condition of IKO bearing, IKO bearing grease must be considered from the following aspects:
    1, anti-rust performance
    The grease used in IKO bearings must have an anti-rust effect, and the anti-rust agent is preferably insoluble in water. Grease should have good adhesion and form an oil film on the surface of the steel.
    2, mechanical stability
    Grease becomes soft during machining and causes leakage. During normal operation, the grease will be raked from the IKO bearing housing into the IKO bearing. If the mechanical stability of the grease is insufficient, during the operation, the structure of the soap of the grease will mechanically disintegrate, causing the grease to be destroyed, thereby losing the lubricating effect.
    3, oil seal
    The oil seal is a necessary barrier to protect IKO bearings and lubricants from external contamination. During the operation of IKO bearings, no matter whether debris or moisture can penetrate into the IKO bearing to prevent damage. Proper installation and maintenance is an important factor in the longest service life of IKO bearings. At the same time, attention must be paid to the cleanliness of IKO bearings, the correctness of IKO bearing selection and the selection of appropriate installation and maintenance tools. In addition, IKO bearings must be protected from contamination and moisture and ensure proper installation and lubrication. Therefore, the design of the IKO bearing, the condition of the oil seal, the type of lubricant and the lubrication cycle, and even the special maintenance play the same and important role.

For more information and purchase please visit: https://www.supplyforever.com