There are several important parts to be aware of when purchasing stone engraving machines. If these important parts are purchased well, then the engraving machine will be very easy to use and will not be prone to failure. So, what are the main components to pay attention to when purchasing?
First of all, it is a knife. If a worker wants to do something good, he must first sharpen his weapon. The carving knife is the sharp blade in the engraving machine. Only it can engrave the stone. Therefore, the knives are the first point to observe when purchasing. The knives need to have the following functions, to be hard, to be able to engrave hard stone. The motor of the knife should be stable, the speed should be relatively high, and the speed can be adjusted.
Second, it is the engine. Because the engine of the engraving machine has different functions due to the engraving machine, the stone engraving machine manufacturer has a high-power engine at the time of design, and also has a slightly smaller power engine, and needs to select the power according to the needs. High power is more suitable for cutting and large engraving, while low power is more suitable for some precision engraving.
Finally, it is the machine tool. The machine tool of the engraving machine should be stable and have better shock resistance. At the same time, the axis of the machine tool should be relatively wide, it is not easy to get stuck, and the operation should be smoother, so that it can maintain a relatively synchronous operation during the work, and there is no problem that the machine axis is stuck and cannot run.
