As we all know, CNC carpenter carving machine is a fully automated machining equipment, but the automation of mechanical equipment, more or less need some technical assistance. For example, the CNC carpenter engraving machine equipment, which is widely used now, is a fully automated engraving process, but the loading and unloading tools still require manual assistance. So what are the elements and safety knowledge to be aware of when loading and unloading tools for the engraving machine? Shun carving carpenter carving machine factory for the specific introduction of the tool loading and unloading process.
1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.
2, the chuck should be placed in the pressure cap, otherwise the tool is not easy to install positive, if the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.
3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.
4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise the vibration will easily occur during the machining process, which will affect the processing quality of the workpiece.
5. When changing the tool, it must be ensured that the spindle speed is zero, that is, the tool is allowed to be disassembled when the spindle is stopped, otherwise serious personal injury accidents may occur.
6. If you use a presser foot to sculpt, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.
7. In the process of screwing up the cap upwards, the cap must be aligned with the rotor thread, first by hand and screwed into place without any effort.
8. When unloading the knife, use an air gun to clean the dust on the pressure cap and the rotor shaft before unloading the knife.
Strictly follow the knowledge of the carpenter's boring machine tool loading and unloading knowledge, which not only ensures the safety of loading and unloading, but also avoids the problem of loading and unloading problems.
