Woodworking engraving machine tool loading and unloading attention?

As we all know, CNC carpenter carving machine is a fully automated machining equipment, but the automation of mechanical equipment, more or less need some technical assistance. For example, the CNC carpenter engraving machine equipment, which is widely used now, is a fully automated engraving process, but the loading and unloading tools still require manual assistance. So what are the elements and safety knowledge to be aware of when loading and unloading tools for the engraving machine? Shun carving carpenter carving machine factory for the specific introduction of the tool loading and unloading process.
 1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.

2, the chuck should be placed in the pressure cap, otherwise the tool is not easy to install positive, if the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.

3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.

4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise the vibration will easily occur during the machining process, which will affect the processing quality of the workpiece.

5. When changing the tool, it must be ensured that the spindle speed is zero, that is, the tool is allowed to be disassembled when the spindle is stopped, otherwise serious personal injury accidents may occur.

6. If you use a presser foot to sculpt, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.

7. In the process of screwing up the cap upwards, the cap must be aligned with the rotor thread, first by hand and screwed into place without any effort.

8. When unloading the knife, use an air gun to clean the dust on the pressure cap and the rotor shaft before unloading the knife.

    Strictly follow the knowledge of the carpenter's boring machine tool loading and unloading knowledge, which not only ensures the safety of loading and unloading, but also avoids the problem of loading and unloading problems.

CNC woodworking engraving machine installation precautions

After many customers purchased the CNC carpenter engraving machine, they did not know how to unload the goods, the equipment was debugged, etc., which also brought some harm. Although our engraving machine technicians will arrive at the customer's factory in time after the customer's CNC carpenter engraving machine arrives, but because the customer receives the equipment and wants to check it in time, some customers may return to purchase the equipment again, and we will not let our engraving machine technicians In the past, debugging, training, etc., thought that they can independently install and debug equipment, but often pay little attention to some small details, which will also cause equipment damage. Then, after receiving the goods, how to install and debug the CNC carpenter engraving machine?

1. After the carpenter arrives, unpack the machine and remove the machine from the bottom. Place the machine in a horizontal position. During the placement process, do not touch the machine.

2. After the carpenter engraving machine is placed, open the random toolbox, take out the wires and connect to the power supply, and connect the air plug according to the line number to check whether the circuit operation is normal.

3. Connect the computer with the control and the carpenter engraving machine, and open the corresponding driver and application software of the computer device. (For details, please refer to the user manual of the engraving machine or the CD-ROM)

4. After the drive is finished, set the internal parameters, turn the carpenter engraving machine to check whether the machine is running in the correct direction, and whether the stroke is accurate.

    Also pay attention to the environment of the carpenter engraving machine operation, especially the humidity and temperature in the workshop; when the temperature is below zero, the liquid in the water-cooled spindle motor should be released; when the engraving machine is operated, the humidity should be controlled within 75%. Good, if the situation is special, it will not exceed 95% in a month.