What is the advertising engraving machine control system?

The control system is the core part of the advertising engraving machine. He is equivalent to our human brain and the soul is a total control system and control center. He is a place that specializes in quality. It is a general control mechanism. Without him. The task of the work and the release of the work target, the advertising engraving machine can not be engraved, for example, what kind of pattern is engraved is a process that requires the total control system to perform a debugging.

What are the advertising engraving machine control systems?

The advertising engraving machine control system includes Weihong control system, DSP controller control system, NK series panel control system, new generation control system, MACH3 control system and so on.

How does the advertising engraving machine control system operate?

1. Open <System Parameters> with manual speed and automatic parameters, you can set the appropriate speed yourself.

2. Use the default speed to check one phase, which can increase the processing speed and save time.

3. Use the default speed without tick.

4, speed adaptive optimization, tick. The system is automatically optimized according to the processing path.

5, IJK increased touch, tick.

6, using Z down knife speed, this must be set, it also changes frequently, can be set very slowly or can be set very quickly, free to set.

7. Optimize the Z-direction lifting speed. The knife speed can be set to the idle speed, which means that the knife is slower and slower. Tick. It is also possible to leave the knife with a z-direction speed without setting it.

8, empty command, tick.

9. When the pause or end is completed, the spindle is automatically stopped. This phase is necessary for the main shaft to be controlled by the system. It’s not a matter of not checking.

10. The most important thing behind this parameter table is the Z-axis inversion. Must be ticked.

How does the advertising engraving machine control system be installed before operation? We take the Weihong control system as an example.

1. Install the Weihong card into the PCI slot of the computer. Please pay attention to plugging in and plugging in.

2, the CD into the CD-ROM drive, open / Weihong / Ncstudio? V5.5? Chinese? Setup / folder, click on Setup.exe, always click "Next" to complete the installation, restart the computer.

3. Install the CNC adapter driver, right click “My Computer” / “Properties” / “Hardware” / “Device Manager”, right click on the yellow question mark, click “Update Driver”, and click “Next” to complete the installation.

The engraving machine should not be flustered

When the engraving machine is working, if the knife is broken, it will be unprepared. How to solve it? Let Hefei engraving machine http://www.tuaosk.com teach you a few strokes to deal with easily.

First check the material

Look at the material for impurities and whether the material is too hard. Broken knives can occur with impurities or hard materials.

The second is to check the machine

To see if the size of the machine is not suitable, and whether the machine is level, experience tells us that if the engraving machine is not leveled, it may cause a broken knife.

There is also testing the speed of the spindle motor

If the spindle motor speed is too low, the gear will increase the amount of the tool, so that the cutting force will become larger, which will cause the knife to be broken. Therefore, it is recommended that the spindle speed you use is slightly higher.

Finally, the processing technology of the engraving machine

It is necessary to check whether the reserved machining allowance of the engraving machine is reasonable, and whether the margin is stepped. If the machining allowance is not reasonable, then the engraving machine will vibrate when cutting, resulting in broken knife, so the engraving machine The processing technology also needs to be taken seriously.